Exhaust Gas Measurements

The measuring instruments from ECM (Engine Control and Monitoring) are used by well-known vehicle manufacturers, engine manufacturers, research institutions and government agencies.

Here you find test solutions for Lambda, AFR, %O₂, NOx and EGR for in-vehicle use and test stands. ECM test equipment is easy to use, easy to calibrate and provides fast response.

The ECM headquarter is located in Sunnyvale, CA, the "Heart of Silicon Valley."

CSM GmbH is distributor of ECM and happy to provide ECM products complementary to the own test equipment.

CAN interface for ETAS LA3, LA4 from CSM

With SMB4CAN you can use at the same time up to 4 SMB bus Lambda measurement devices from ETAS on the CAN bus. Integration in CSM INCA AddOn is also available.

Direct to

Exhaust Measurement Instruments

ECM EGR5230
EGR Analyzer

EGR Analyzer for fast EGR measurement
Measurement of Exhaust Gas Recirculation, Lambda, AFR, %O2 and pressure
Fast response allows for loop control
Maintenance-free and simple to calibrate
For mobile and laboratory use
CAN, RS232, USB and analog interfaces

Data_Sheet

ECM LambdaCAN

Universal exhaust measurement module
Measurement of λ, AFR, Φ, %O₂and pressure
0.4 to 25 Lambda range, 0 to 25% O₂
Pressure compensation (Optional)
Fuel types programmable
CAN interface

Data_Sheet

ECM Lambda5220
Lambda Analyzer

Lambda Analyzer for mobile and laboratory use
Measurement of λ, AFR, Φ, %O₂and pressure
0.4 to 25 Lambda range, 0 to 25% O₂
Pressure compensation (optional)
Fuel types programmable
1 or 2 channel
CAN, RS232, USB and analog interfaces

Data_Sheet

ECM NOxCAN

NOx measurement module
Measurement of NOx, λ, AFR, Φ and %O₂
0 to 3000 ppm NOx range (for Lambda >1 only)
0.4 to 25 Lambda range, 0 to 25% O₂
CAN interface

Data_Sheet

ECM NOx5210
NOx Analyzer

NOx Analyzer for mobile and laboratory use
Measurement of NOx, λ, AFR, Φ and %O₂
0 to 3000 ppm NOx range (for Lambda >1 only)
0.4 to 25 Lambda range, 0 to 25% O₂
1 or 2 channel
CAN, RS232, USB and analog interfaces

Data_Sheet

ECM AFM1600L
Lambda meter

Lambda meter for development, calibration and monitoring of spark ignition engines
0.6 to 1.3 Lambda range
Linearized Analog Output for Lambda
Compact and rugged packaging
Easy-to-read display

Data_Sheet

ECM AFM1600D
%O₂ meter

%O₂ meter for development, calibration and monitoring of diesel engines
%O₂-range 0 to 25
Linearized Analog Output for %O₂
Compact and rugged packaging
Easy-to-read display

Data_Sheet

SMB4CAN

SMB4CAN

Converter for up to 4 Lamdba Meter from SMB bus to CAN bus
For use of ETAS LA3, LA4 ot other compatible devices
All values available via CAN bus: Lambda, O2, A/F, Ri
For Calibration systems from ETAS (INCA), dSPACE (CalDesk) , Vector (CANape), ATI (VISION), National Instruments (DIAdem) and others

Data_Sheet